Keychron

K2 HE All Wood

75% magnetic-switch keyboard, walnut body

A solid walnut body with CNC-machined aluminium side panels, at 890 g, on TMR magnetic switches.

  • 75%
  • Walnut body
  • Magnetic switches
  • TMR
  • Rapid trigger
  • 2.4 GHz
  • Bluetooth
  • 4000 mAh
Keychron K2 HE All Wood

At a glance

Solid walnut

A walnut body with CNC-machined aluminium side panels — grain that is different on every one.

TMR magnetic switches

Gateron Double-Rail switches read by TMR sensors, measuring depth rather than contact.

890 grams

Lighter than the aluminium and resin versions, and warmer to the hand than either.

4000 mAh

Up to 110 hours, over 2.4 GHz, Bluetooth or USB-C.

Walnut, all the way round

Not a wooden trim on a metal case — the frame and the bottom case are both walnut, with CNC-machined aluminium only on the side panels. The grain runs differently on every board, it warms to the hand in a way aluminium never does, and at 890 g it is the lightest of the three K2 HE bodies.

Solid walnut body of the Keychron K2 HE All Wood

Gold anodised against the grain

The aluminium side panels are anodised in a restrained gold, chosen to sit with the deep brown of the walnut and the matching keycaps rather than to stand apart from them. It is a quiet keyboard to look at, which is unusual in this category.

Walnut frame and aluminium side panel

TMR sensing, and what it buys

A magnetic switch closes no contact: a magnet moves and a sensor measures how far. TMR sensors do that with less drift and less current than the Hall-effect sensors that came before, which is what allows 0.1 mm resolution over a 0.2 to 3.8 mm range on a keyboard that still runs for weeks between charges.

TMR sensor under a magnetic switch

Set where each key fires

Actuation anywhere between 0.2 mm and 3.8 mm, per key, to a tenth of a millimetre. Rapid trigger releases a key the instant it starts to rise. One key can hold four commands at four depths, analogue gamepad output reads how far you press, and last-keystroke prioritisation decides which of two opposing direction keys wins.

Keychron Launcher, HE mode

Layered, so the wood works with it

EVA foam under the PCB, an EPDM film between plate and board, and a PET film across the bottom case, all on an aluminium plate inside a walnut shell. Wood damps differently from metal, and the result is a fuller, softer bottom-out than the aluminium version gives.

Internal structure of the K2 HE All Wood

Double-shot PBT, in two browns

OSA profile double-shot PBT in deep brown and a lighter tone, chosen to match the walnut. The legends are a second piece of plastic rather than paint, so they cannot wear off, and PBT does not develop the shine that ABS picks up under a fingertip.

Two-tone double-shot PBT keycaps

Hot-swappable, Gateron Double-Rail only

Switches lift out and push in with no soldering iron. As on every K2 HE, the replacements have to be Gateron Double-Rail magnetic switches — magnetic switches are not cross-compatible the way MX-style mechanical ones are.

Hot-swap sockets

Three devices, three ways in

2.4 GHz at 1000 Hz, Bluetooth across three paired devices, or the USB-C cable, and the same behaviour on macOS, Windows and Linux — one keyboard for the desktop, the laptop and the tablet.

1000 Hz polling rate

In detail

Specification

Keyboard

Layout
75%
Switches
Gateron Double-Rail magnetic, read by TMR sensors
Switch support
Hot-swappable, Gateron Double-Rail magnetic only
Keycaps
OSA profile double-shot PBT, not shine-through
Plate
Aluminium
Stabilisers
Screw-in PCB
Backlight
North-facing RGB
N-key rollover
Yes, wired and wireless
Damping
EVA foam, EPDM film, bottom-case PET film

Hall-effect features

Actuation point
0.2 – 3.8 mm
Resolution
0.1 mm
Rapid trigger
Yes
Dynamic keystroke
Four commands on one key, at four depths
Last keystroke priority
Yes
Gamepad analogue
Yes

Connectivity and power

Connection
2.4 GHz / Bluetooth / USB-C
Polling rate
1000 Hz on 2.4 GHz and wired, 125 Hz on Bluetooth
Battery
4000 mAh lithium-polymer
Battery life
Up to 110 h
Controller
256 KB
Operating systems
macOS, Windows, Linux

Physical

Dimensions
323.13 × 133.13 mm
Weight
890 g
Height
36.01 mm at the front and 44.45 mm at the back with keycaps; 27.89 and 34.67 mm without
Typing angle
Frame
Walnut, with CNC-machined aluminium side panels
Operating temperature
−10 °C to 50 °C

Figures published by the manufacturer. Battery life is a laboratory result and varies with use.

Interested in this keyboard?

This page presents equipment we distribute; it is not a shop and nothing is sold here. Write to us about availability, layouts and trade terms, or buy it from one of our partners.

Ask about this product