Keychron

K4 HE

96% magnetic-switch keyboard, ISO layouts

A 96% board in aluminium and wood on magnetic switches, with dynamic rapid trigger, snap click and an analogue mode.

  • 96%
  • ISO
  • Magnetic switches
  • Rapid trigger
  • QMK
  • 2.4 GHz
  • Bluetooth 5.2
  • 4000 mAh
Keychron K4 HE

At a glance

96% layout

A number pad without the width of a full-size board — 377 mm across.

Magnetic switches

Gateron Double-Rail. A sensor reads how far the magnet moved, not whether a contact closed.

0.2 to 3.8 mm

Actuation set per key to a tenth of a millimetre, with dynamic rapid trigger on top.

4000 mAh

Up to 110 hours with the backlight off, over 2.4 GHz, Bluetooth 5.2 or USB-C.

96%: the number pad, without the desk

The 96% layout pushes the number pad, the arrows and the navigation keys tight against the alphas instead of separating them. You keep everything a full-size board has and give back around six centimetres of width — which is the space the mouse was going to need.

Keychron K4 HE from above

Hall-effect switches, and what they change

A mechanical switch closes a contact — down, or not down, at a point the factory chose. A Gateron Double-Rail magnetic switch carries a magnet and a sensor measures how far it has travelled. The board knows the depth of every key at every instant, and every feature below is a consequence of that.

Gateron Double-Rail magnetic switch

Dynamic rapid trigger, LKP and snap click

Actuation is set per key from 0.2 to 3.8 mm at 0.1 mm resolution. Dynamic rapid trigger arms and releases a key on how far it has moved rather than at a fixed point, so a press registers immediately and resets on the way up. Last-key priority makes the most recent of two opposing direction keys win; snap click lets the deeper of two simultaneous presses take over. Both are off until you switch them on in the Launcher.

Keychron Launcher, HE settings for the K4 HE

One key, four actions — and an analogue mode

Dynamic keystrokes put up to four separate commands on a single key at four depths: a light press does one thing, a deeper press another, the release a third. Analogue mode goes further and sends a variable value instead of on or off, so how far you press decides how fast the car accelerates or how far the character leans.

Keychron K4 HE in detail

Aluminium and wood, on a tray mount

An aluminium and wood frame over an ABS bottom case, with an aluminium plate on a tray mount, at about 1066 g. Three typing angles — 5°, 8° and 11° — which is a steeper range than most, and welcome on a board with a number pad.

Internal structure of the Keychron K4 HE

Hot-swappable, double-rail only

Switches lift out and push in without a soldering iron. The constraint to know before ordering: the K4 HE takes Gateron Double-Rail magnetic switches only — the Gateron Magnetic Jade and KS-20 do not fit, and magnetic switches are not cross-compatible the way MX-style mechanical ones are.

Keychron K4 HE from the side

North-facing RGB, 22 modes and more

Twenty-two or more backlight modes, with hue, saturation, brightness and effect speed all set in the Launcher. The keycaps are OSA profile double-shot PBT and are not shine-through, so the light frames the caps rather than passing through the legends.

North-facing RGB backlight

Mac and Windows on one board

A system toggle moves the board between macOS and Windows, the extra modifier keycaps for both are in the box, and a separate layout is stored on the keyboard for each — so the switch is a flick, not a remapping session.

Keychron K4 HE on a desk

ISO layout versions

The K4 HE is built fully assembled in four ISO layouts. Ask us which are in stock.

Keychron K4 HE, UK ISO layout
UK
Keychron K4 HE, German ISO layout
German
Keychron K4 HE, Nordic ISO layout
Nordic
Keychron K4 HE, Swiss ISO layout
Swiss

In detail

Specification

Keyboard

Layout
96% · ISO
Switches
Gateron Double-Rail magnetic
Switch support
Hot-swappable, Gateron Double-Rail magnetic only
Keycaps
OSA profile double-shot PBT, not shine-through
Plate
Aluminium
Mount
Tray mount
Stabilisers
Plate-mounted
Backlight
North-facing RGB, 22+ modes
N-key rollover
Yes, wired and wireless
Firmware
QMK, set in the Keychron Launcher

Hall-effect features

Actuation point
0.2 – 3.8 mm
Resolution
0.1 mm
Rapid trigger
Yes, dynamic
Dynamic keystroke
Four commands on one key, at four depths
Last keystroke priority
Yes, with snap click
Analogue mode
Yes

Connectivity and power

Connection
2.4 GHz / Bluetooth / USB-C
Bluetooth
5.2, up to three devices
Polling rate
1000 Hz on 2.4 GHz and wired, 125 Hz on Bluetooth
Battery
4000 mAh lithium-polymer
Battery life
Up to 110 h with the backlight off
Controller
ARM Cortex-M4 STM32F402, 256 KB
Cable
USB-A to USB-C
Operating systems
macOS, Windows, Linux

Physical

Dimensions
377.1 × 126.4 mm
Weight
About 1066 g
Height
31.7 mm at the front, 40.9 mm at the back, with keycaps
Typing angles
5° / 8° / 11°
Frame
Aluminium and wood, over an ABS bottom case
Operating temperature
−10 °C to 50 °C

Figures published by the manufacturer. Battery life is a laboratory result and varies with use.

Interested in this keyboard?

This page presents equipment we distribute; it is not a shop and nothing is sold here. Write to us about availability, layouts and trade terms, or buy it from one of our partners.

Ask about this product