Actuation you set yourself
Anywhere from 0.2 to 3.8 mm, per key, in steps of 0.1 mm.
Keychron
Q6 HE
Full-size magnetic-switch keyboard, ISO layouts
A full aluminium board on magnetic switches: you set how far each key has to travel before it registers, anywhere from 0.2 to 3.8 millimetres.
- 100%
- ISO
- Magnetic switches
- Rapid trigger
- 2.4 GHz
- Bluetooth 5.2
- 2178 g
At a glance
Rapid trigger
The key resets the moment it starts to rise, so a repeated press does not wait for the full return.
Four actions on one key
Dynamic keystroke: a single key can fire different things depending on how far down it is pressed.
2178 grams of aluminium
An aluminium case and an aluminium plate, on a double-gasket mount.
Magnetic, not mechanical
There is no metal contact under these keys. A magnet in the stem moves past a sensor, and the board reads the distance rather than a click — so nothing wears out from being pressed, and the point at which a key counts as pressed becomes a setting rather than a property of the hardware.
0.2 to 3.8 millimetres
Set the actuation point per key, in steps of a tenth of a millimetre. Shallow on the keys you game with, so they fire almost on contact; deeper on the ones you keep hitting by accident. Rapid trigger resets a key the instant it starts to rise, which is what makes repeated presses keep up with the hand.
One switch family, and only one
The sockets are hot-swappable, but worth knowing before you buy: this board takes the Gateron double-rail magnetic switch and nothing else. Gateron Magnetic Jade and KS-20 do not fit, and no ordinary MX switch will work, because the board reads magnets rather than contacts.
Aluminium case, aluminium plate
2178 grams, with the plate machined from aluminium rather than plastic and held on a double-gasket mount. The mass keeps the board still and takes the ring out of each keystroke.
Set it all in the browser
Actuation points, rapid trigger, the dynamic keystroke layers and the key map are all configured in the Keychron Launcher web app, with nothing to download and nothing to install.
What comes in the box
The keyboard, the 2.4 GHz receiver, a 1.8 m USB-C cable with a Type-A adapter, the extra keycaps for the other operating system, a combined keycap and switch puller, a hex key for the case, and the quick start guide.
ISO layout versions
Four ISO layouts are produced: German, UK, Nordic and Swiss. Ask us which are in stock.
Specification
Keyboard
- Layout
- 100% · ISO
- Switches
- Gateron double-rail magnetic
- Switch support
- Gateron double-rail magnetic only
- Actuation
- 0.2 to 3.8 mm, in steps of 0.1 mm
- Rapid trigger
- Yes
- Dynamic keystroke
- Four actions per key
- Keycaps
- OSA profile, double-shot PBT, not shine-through
- Frame
- Aluminium
- Plate
- Aluminium
- Stabilisers
- Screw-in PCB
- Backlight
- South-facing RGB
- N-key rollover
- Yes, wired and wireless
Connectivity and power
- Connection
- 2.4 GHz / Bluetooth / USB-C
- Bluetooth
- 5.2
- Polling rate
- 1000 Hz on 2.4 GHz and wired, 90 Hz on Bluetooth
- Battery
- 4000 mAh lithium-polymer
- Battery life
- Up to 100 h with the backlight off
- Cable
- 1.8 m USB-C cable and a Type-A to Type-C adapter
- Controller
- ARM Cortex-M4 STM32F402RC, 256 KB
Physical
- Dimensions
- 446.01 × 137 mm
- Weight
- 2178 ± 10 g
- Height
- 20.6 mm at the front, 31.09 mm at the back, without keycaps
- Typing angles
- 5.3°
- Operating temperature
- −10 °C to 50 °C
Figures published by the manufacturer. Battery life is a laboratory result and varies with use.
Interested in this keyboard?
This page presents equipment we distribute; it is not a shop and nothing is sold here. Write to us about availability, layouts and trade terms, or buy it from one of our partners.