2184 grams of aluminium
A full aluminium case. It stays where you put it and it does not sound like plastic.
Keychron
Q6 Max
Full-size aluminium wireless keyboard, ISO layouts
Two kilos of aluminium on a double-gasket mount, over 2.4 GHz, Bluetooth or a cable, in four ISO layouts.
- 100%
- ISO
- Aluminium
- 2.4 GHz
- Bluetooth 5.1
- QMK / VIA
- 2184 g
At a glance
Gasket mount
A PC plate held in gaskets over layers of foam, for a softer bottom-out.
Three ways in
2.4 GHz, Bluetooth 5.1 across three devices, or USB-C, switched on the board.
QMK and VIA
Remap anything in the Keychron Launcher web app, with nothing to install.
Two kilos of aluminium
The case is aluminium and the board weighs 2184 grams. That mass is not decoration: it stops the keyboard sliding under a fast hand, and it absorbs the resonance that makes a plastic case sound hollow.
Held in gaskets, not bolted down
A PC plate sits between gaskets rather than screwed to the case, with sound-absorbing foam, IXPE, PET film and a latex bottom pad beneath it. The assembly gives very slightly under each press, which is what takes the hard edge off the bottom-out.
Hot-swappable, Gateron Jupiter inside
It ships with Gateron Jupiter switches, and every socket takes 3-pin and 5-pin MX-style switches without a soldering iron — Gateron, Cherry MX, Kailh and the rest.
Screw-in PCB stabilisers
The stabilisers under the spacebar, shift, enter and backspace screw into the PCB rather than clipping to the plate. That is the version that does not rattle, and third-party screw-in stabilisers fit too.
Keycaps that stay matte
Double-shot PBT in the OSA profile — an OEM height with a spherical dish, so the fingertip sits in the key rather than on it. The legends are a second piece of plastic rather than paint, and PBT resists the shine ABS picks up with use.
Mac and Windows on one board
A toggle moves the board between macOS and Windows, with the extra keycaps for the modifier keys that differ in the box, and a keymap for each system stored on the keyboard.
What comes in the box
The keyboard, the 2.4 GHz receiver, a USB-C cable with a Type-A adapter, the extra keycaps for the other operating system, a combined keycap and switch puller, a hex key for the case, and the quick start guide.
ISO layout versions
Four ISO layouts are produced: German, UK, Nordic and Swiss. Ask us which are in stock.
Specification
Keyboard
- Layout
- 100% · ISO
- Switches
- Gateron Jupiter, hot-swappable
- Switch support
- 3-pin and 5-pin MX
- Keycaps
- OSA profile, double-shot PBT, not shine-through
- Frame
- Aluminium
- Plate
- PC
- Mount
- Double gasket
- Stabilisers
- Screw-in PCB
- Backlight
- South-facing RGB
- N-key rollover
- Yes, wired and wireless
Connectivity and power
- Connection
- 2.4 GHz / Bluetooth / USB-C
- Bluetooth
- 5.1, up to three devices
- Polling rate
- 1000 Hz on 2.4 GHz and wired, 90 Hz on Bluetooth
- Battery
- 4000 mAh lithium-polymer
- Battery life
- Up to 180 h with the backlight off, about 100 h at the lowest RGB brightness
- Controller
- ARM Cortex-M4 STM32F402, 256 KB
- Operating systems
- macOS, Windows, Linux
Physical
- Dimensions
- 446 × 137 mm
- Weight
- 2184 ± 10 g
- Height
- 20.1 mm at the front, 32.6 mm at the back, without keycaps
- Typing angles
- 5.2°
- Operating temperature
- −10 °C to 50 °C
Figures published by the manufacturer. Battery life is a laboratory result and varies with use.
Interested in this keyboard?
This page presents equipment we distribute; it is not a shop and nothing is sold here. Write to us about availability, layouts and trade terms, or buy it from one of our partners.