Gasket mount
A PC plate held in gaskets over sound-absorbing foam, for a softer bottom-out.
Keychron
V1 Max
96% wireless custom keyboard, ISO layouts
A 96% board in the 1800 compact layout, gasket-mounted, on 2.4 GHz, Bluetooth or a cable, in four ISO layouts.
- 75%
- ISO
- 2.4 GHz
- Bluetooth 5.1
- USB-C
- QMK / VIA
- 4000 mAh
At a glance
Three ways in
2.4 GHz, Bluetooth 5.1 across three devices, or USB-C, switched on the board.
Screw-in stabilisers
Screwed into the PCB rather than clipped to the plate — the version that does not rattle.
QMK and VIA
Remap anything in the Keychron Launcher web app, with nothing to install.
Held in gaskets, not bolted down
A PC plate sits between gaskets rather than screwed to the case, with sound-absorbing foam and PET film beneath it. The assembly gives very slightly under each press, which is what takes the hard edge off the bottom-out and the sound with it.
2.4 GHz, Bluetooth or the cable
A switch on the board moves between the 2.4 GHz receiver, Bluetooth 5.1 across three devices, and USB-C. The 4000 mAh cell carries it, and the receiver clips into a magnetic slot on the keyboard when it is not in use.
Hot-swappable, Gateron Jupiter inside
It ships with Gateron Jupiter switches, and every socket takes 3-pin and 5-pin MX-style switches without a soldering iron — Gateron, Cherry MX, Kailh and the rest.
Screw-in PCB stabilisers
The stabilisers under the spacebar, shift, enter and backspace screw into the PCB rather than clipping to the plate. That is the version that does not rattle, and third-party screw-in stabilisers fit too.
Mac and Windows on one board
A toggle moves the board between macOS and Windows, with the extra keycaps for the modifier keys that differ in the box, and a keymap for each system stored on the keyboard.
Keycaps that stay matte
Double-shot PBT in the OSA profile — an OEM height with a spherical dish, so the fingertip sits in the key rather than on it. The legends are a second piece of plastic rather than paint, and PBT resists the shine ABS picks up with use.
ISO layout versions
Four ISO layouts are produced: German, UK, Nordic and Swiss. Ask us which are in stock.
Specification
Keyboard
- Layout
- 75% · ISO
- Switches
- Gateron Jupiter, hot-swappable
- Switch support
- 3-pin and 5-pin MX
- Keycaps
- OSA profile, double-shot PBT or shine-through ABS
- Plate
- PC
- Mount
- Gasket mount
- Stabilisers
- Screw-in PCB
- Backlight
- South-facing RGB, 22 modes
- N-key rollover
- Yes, wired and wireless
Connectivity and power
- Connection
- 2.4 GHz / Bluetooth / USB-C
- Bluetooth
- 5.1, up to three devices
- Polling rate
- 1000 Hz on 2.4 GHz and wired, 90 Hz on Bluetooth
- Battery
- 4000 mAh lithium-polymer
- Battery life
- Up to 190 h with the backlight off, about 100 h at the lowest RGB brightness
- Charging time
- About 5 h
- Controller
- ARM Cortex-M4 STM32F402, 256 KB
- Operating systems
- macOS, Windows, Linux
Physical
- Dimensions
- 328.5 × 148.7 mm
- Weight
- 770 ± 10 g
- Height
- 21.5 mm at the front, 29.4 mm at the back, without keycaps
- Typing angles
- 3.5° / 7.1° / 9.5°
- Frame
- ABS
- Operating temperature
- −10 °C to 50 °C
Figures published by the manufacturer. Battery life is a laboratory result and varies with use.
Interested in this keyboard?
This page presents equipment we distribute; it is not a shop and nothing is sold here. Write to us about availability, layouts and trade terms, or buy it from one of our partners.